Igmp Filtering Profile; Figure 72 Multicast: Igmp Filtering Profile; Table 55 Multicast: Igmp Filtering Profile - ZyXEL Communications ZyXEL Dimension ES-3148 User Manual

22.4 IGMP Filtering Profile

IGMP filter profiles allow you to control access to IGMP multicast groups. This allows you to
have a service available to a specific IGMP multicast group. You can configure an IGMP filter
profile for an IGMP multicast group that has access to a service (like a SIP server for
example). Within a profile, configure an IGMP filter to specify the multicast IP address
ranges. Then assign the IGMP filter profile to the ports (in the Multicast Setting screen) that
are allowed to use the service.
Click Advanced Applications and Multicast in the navigation panel. Click the Multicast
Setting link and then the IGMP Filtering Profile link to display the screen as shown.

Figure 72 Multicast: IGMP Filtering Profile

The following table describes the labels in this screen.

Table 55 Multicast: IGMP Filtering Profile

LABEL
Profile Name
Start Address
End Address
Add
Clear
Profile Name
Start Address
Chapter 22 Multicast
DESCRIPTION
Enter a descriptive name for the profile for identification purposes.
To configure additional rule(s) for a profile that you have already added, enter the
profile name and specify a different IP multicast address range.
Type the starting multicast IP address for a range of multicast IP addresses that
you want to belong to the IGMP filter profile.
Type the ending multicast IP address for a range of IP addresses that you want to
belong to the IGMP filter profile.
If you want to add a single multicast IP address, enter it in both the Start Address
and End Address fields.
Click Add to save the settings to the switch.
Click Clear to clear the fields to the factory defaults.
This field displays the descriptive name of the profile.
This field displays the start of the multicast address range.
ES-3148 User's Guide
169