ES-3148 User's Guide
Figure 49 MRSTP: Configuration
The following table describes the labels in this screen.
Table 28 MRSTP: Configuration
LABEL
Status
Tree
Active
Bridge Priority
Hello Time
114
DESCRIPTION
Click Status to display the MRSTP Status screen (see
This is a read only index number of the STP trees.
Select this check box to activate an STP tree. Clear this checkbox to disable an
STP tree.
Bridge priority is used in determining the root switch, root port and designated port.
The switch with the highest priority (lowest numeric value) becomes the STP root
switch. If all switches have the same priority, the switch with the lowest MAC
address will then become the root switch. Select a value from the drop-down list
box.
The lower the numeric value you assign, the higher the priority for this bridge.
Bridge Priority determines the root bridge, which in turn determines Hello Time,
Max Age and Forwarding Delay.
This is the time interval in seconds between BPDU (Bridge Protocol Data Units)
configuration message generations by the root switch. The allowed range is 1 to 10
seconds.
Figure 48 on page
Chapter 11 Spanning Tree Protocol
113).