2. Printing
2.4. Adjusting the Height of the Platen
This machine adjusts the height of the platen automatically.
The height adjustment of the platen must be performed before printing a garment. The adjustment result
will be reset 2 hours after the last print.
Once height adjustment of the platen is performed, you can print without height adjustment until the height
adjustment result is reset.
IMPORTANT!
If the garment is not flat, the platen height will not be set properly and will not print properly.
Be sure to flatten the garment.
Having the head too far away from the printing surface can cause poor prints in addition to
interfering with the encoder function, causing an error due to excessive ink mist. This can
also cause damage to other components due to excessive ink mist. It is important when
changing from a thicker fabric to a thinner fabric that the height adjustment of the platen
must be performed.
Flatten the clothes set onto the platen as much as possible.
Press [HEIGHT ADJUST].
103
RICOH Ri 4000 User Manual