9. Troubleshooting Guide
Decrease the value for [Intensity:].
Example: Change the value from the default value of "98" to "70". The value is for reference
purposes only.
Click [OK].
If the problem persists, perform the following.
•
Make sure to heat press the shirt prior to printing.
•
Set drying time longer.
•
At the time of fixing the ink, the normal fixing is carried out after leaving a gap of about 1 to 2 cm for
about 10 seconds without touching the medium with the heat press.
•
There is a possibility that the brand or type of printed fabric is bleeding easily.
If possible, change the brand or type of printed fabric.
231
RICOH Ri 4000 User Manual