Table of Contents
Advertisement
4. Adjustments
4.
When there are no straight vertical side lines, as shown in the upper illustration,
check the last square out of the sequence of squares with the smallest gap in the
side lines and then find a corresponding value.
In the upper illustration, the value is "+4".
After you enter a value for all the rows, press [ALIGN] that sets the new values.
Print the pattern again and repeat the above process.
Repeat the process until all rows (A, B, C, etc.) show the 0 column or close to the
0 column as the best value.
202
RICOH Ri 4000 User Manual
Advertisement
Table of Contents
