Table of Contents
Advertisement
2. Printing
2. Printing
2.1. Printing Flow
The basic printing flow is as follows.
Adjust the image or printer settings as necessary.
Prepare the print image.
See the ColorGATE Productionserver manual.
Flatten the garment using a heat press.
See page 99, "Flatten the garment by using a heat press".
Set the garment on the platen.
See page 100, "Setting the Garment onto the Platen".
Adjusting the Height.
See page 103, " Adjusting the Height of the Platen ".
Send the print job to the printer.
See page 109, " Sending the Print Image ".
Print the garment.
See page 114, " Printing Your Image ".
Fix the ink with heat treatment.
See page 120, "Set the Image with Heat Treatment".
96
RICOH Ri 4000 User Manual
Advertisement
Table of Contents
