Table of Contents
Advertisement
Cruiser 322/402/502T
Power Pulse 322/402/502T
○ Hold down the S2
- The acronym relative to the setting to be edited appears on the following displays: D1.
A
- The value relative to the selected setting appears on the following displays: D2.
○ Press the S2
○ Using theencoder E1
B
cally.
Tab. 4 - Parameters of the 2nd level menu: MMA mode
ACRONYM
SETTING
EL.
ELECTRODE TYPE
Urd
OUTPUT VOLTAGE REDUCTION
U.EL.
LONG ARC VOLTAGE
(except S2) to save the setting and exit the menu.
Press any key
- ELECTRODE TYPE
○ This parameter allows for the selection of the type of electrode to be used. The selection auto-
matically allows the optimum welding parameters to be set.
- VRD
○ This parameter reduces the potential across the welding sockets when welding is not in progress.
- The arc strike procedure is as follows:
• Touch the workpiece with the electrode tip.
• Raise the electrode.
• Power is released for several seconds.
• Touch the workpiece with the electrode tip.
• The welding arc will strike.
- LONG ARC VOLTAGE
○ This parameter inhibits power output when the potential between electrode and workpiece ex-
ceeds the pre-set threshold level.
- Consequences of a higher value:
• The welding arc is kept triggered also with the electrode detached from the workpiece being
soldered.
- Consequences of a lower value:
• Faster exit from weld.
*SYN: This code indicates that parameter control is synergic. The optimal value of this parameter is
set automatically by the microprocessor on the basis of the pre-set welding current value.
• W hen SYN is installed, to display the synergic value press the following button: S5.
• T his value can be displayed but it is not user-adjustable.
WELD TH E W O R L D
button for 3 seconds to access the 2nd level menu.
Menu
button to scroll the list of settings to edit.
Menu
, edit the value of the selected setting. The value is saved automati-
MIN
DEFAULT
MAX
bAS= basic
rUt= rutile
bAS
bAS
Crn= chromium/nick-
el
ALU= aluminium
oFF
oFF
on
37
*SYn
70
Cod. 006.0001.1680
09/06/2020 V.2.10
ENGLISH
NOTES
Only MMA
Only MMA
23
Advertisement
Table of Contents
