Mma /Gouging Welding -Second Level Menu; L4 L5 D1 L6 L7 D2 L8 L9 L10 L11 L12 L13L14 E1; Setting; L20 L21 L23 L38 - Weco Cruiser Power Pulse Instruction Manual

Cod. 006.0001.1680
09/06/2020 V.2.10
ENGLISH
- WELDING CURRENT
○ This parameter regulates the primary welding current value.
- MAXIMUM CURRENT WITH REMOTE CONTROLLER
○ The maximum output current value that can be achieved with foot pedal controller external refer-
ence.
- HOT-START
○ This parameter aids electrode melting at the time of arc striking. It is set as a percentage referred
to the value of the following parameter: WELDING CURRENT. The value is limited to 250A max.
- Consequences of a higher value:
• Ease of activation; Greater starting spatter; increase in the activation area.
- Consequences of a lower value:
• Difficulty of activation; Less starting splatter; Reduction in the activation area.
- ARC FORCE
○ This parameter helps to avoid electrode sticking during welding. It is set as a percentage referred
to the value of the following parameter: WELDING CURRENT
- Consequences of a higher value:
• Fluency factors in welding; Arc welding stability;Increased melting of the electrode within the
workpiece; More weld spatter.
- Consequences of a lower value:
• The arc is extinguished more easily, less welding spatter.

8.2 MMA /GOUGING WELDING -SECOND LEVEL MENU

L4 L5 D1
L1
L2
L3
L19
L15
L18
L16
L17
S1
3 sec ACTIVATION/

SELECTION

22
WELD TH E W O R L D
L6 L7 D2 L8
El. bAS
L20 L21
L23
L25
L26
L24
L22
L27
S2 S3 L28 L29
A
L9 L10 L11 L12 L13L14 E1
S4 L30 L31 S5 L34 S6
Cruiser 322/402/502T
Power Pulse 322/402/502T
B

SETTING

L32
L33
L38
L35
L36
L37