Table of Contents
Advertisement
Cruiser 322/402/502T
Power Pulse 322/402/502T
11.4 SELECTING JOBS USING THE TORCH BUTTONS
When an UP/DOWN torch is installed you can select the JOBs in a JOB sequence using the buttons on
the welding torch. To create the JOBs sequence, leave a free memory slot before and after the group
of JOBs to be included in the sequence.
Sequence 1
J.01
J.02
J.03
Select and upload one of the JOBs in the required sequence (e.g. J.06) on the power source user in-
terface.
Use the torch buttons to scroll the JOBs of sequence 2 (J.05, J.06, J.07).
12 TECHNICAL DATA
Directives applied
Construction standards
Conformity markings
WELD TH E W O R L D
Sequence 2
JOB not
saved
J.05
J.06
Waste electrical and electronic equipment (WEEE)
Electromagnetic compatibility (EMC)
Low voltage (LVD)
Restriction of the use of certain hazardous substances (RoHS)
EN 60974-1; EN 60974-3; EN 60974-10 Class A
Equipment compliant with European directives in force
Equipment suitable in an environment with increased hazard of electric shock
Equipment compliant with WEEE directive
Equipment compliant with RoHS directive
JOB not
saved
J.07
J.09
Cod. 006.0001.1680
09/06/2020 V.2.10
ENGLISH
Sequence 3
J.10
J.11
51
Advertisement
Table of Contents
