Stroke Spot - Q-Spot Function - Weco Cruiser Power Pulse Instruction Manual

Cruiser 322/402/502T
Power Pulse 322/402/502T

10.1 2 STROKE SPOT - Q-SPOT FUNCTION

L4 L5 D1
L1
SP.t
L2
L3
L19
L15
L18
L16
L17
S1
3 sec ACTIVATION/
SELECTION
A
○ Press the S5
○ Hold down the S2
- The acronym relative to the setting to be edited appears on the following displays: D1.
B
- The value relative to the selected setting appears on the following displays: D2.
○ Press the S2
TIME
○ Using the encoder E1
C
cally.
Press any key (except S2) to save the setting and exit the menu.
Tab. 17 - Parameters of the 2nd level menu: 2 STROKE SPOT mode
ACRONYM SETTING
SP.t. SPOT TIG TIME
PA.t. PAUSE TIME
- Q-SPOT
○ This function, only present in 2 STROKE SPOT, facilitates spot-welding:
• It allows the exact positioning of the electrode at the point to be joined. The electrode is con-
veniently placed at the desired location.
• Only after lifting of the electrode, the machine emits pulse welding for the stipulated time.
• It considerably reduces the risk of contamination of the joint with the electrode.
• While pressing the torch button, the process may be repeated as many times as required.
WELD TH E W O R L D
L6 L7 D2 L8
0.01
L20 L21
L23
L25
L26
L24
L22
L27
S2 S3 L28 L29 S4
B
button to select the PULSED TORCH 2 STROKE SPOT mode.
button for 3 seconds to access the 2nd level menu.
Menu
button to scroll the list of settings to edit. Select SP.t. SPOT-WELDING
Menu
, edit the value of the selected setting. The value is saved automati-
L9 L10 L11 L12 L13L14 E1
L30 L31 S5 L34 S6
A
ACTIVATION
MIN DEFAULT MAX
0.01s 0.01s 10.0S
0.01s oFF 10.0s
Cod. 006.0001.1680
09/06/2020 V.2.10
ENGLISH
B
SETTING
L32
L33
L38
L35
L36
L37
NOTES
Only with 2 STROKE SPOT
Only with 2 STROKE SPOT
Only with HF=ON
43