Star Micronics TSP400 Series Programmer's Manual page 78

Commands to Set the Page Format
Set page length in lines
FUNCTION
CODE <ESC> "C"
1B
HEX
Sets the page length using the current line spacing, where n is
REMARKS
between 1 and 127.
Changing the line spacing later does not alter the physical page
length.
The current line becomes the top of the page.
Resets the bottom margin.
Invalid when start position detect is ON.
Set page length in inches
FUNCTION
<ESC> "C" <0>
CODE
1B
HEX
Sets the page length to n
REMARKS
The current line becomes the top of the page.
Resets the bottom margin.
Invalid when start position detect is ON.
Set bottom margin
FUNCTION
<ESC> "N"
CODE
1B
HEX
Sets the bottom margin to n lines at the current line spacing, where
REMARKS
n is between 0 and 127.
Bottom margin is reset when you change the page length.
Setting is invalid if the printing area on one page is 36 mm or less.
Invalid when start position detect is ON.
Cancel bottom margin
FUNCTION
CODE <ESC> "O"
1B
HEX
Cancels the bottom margin.
REMARKS
Invalid when start position detect is ON.
n
43 n
n
43 00 n
24 mm, where n is between 1 and 22.
n
4E n
4F
– 75 –