Star Micronics TSP400 Series Programmer's Manual page 93

Commands to Control Peripheral Devices
Define drive pulse width for peripheral device #1
FUNCTION
CODE <ESC><BEL> n1
1B
HEX
Defines the drive pulse width for peripheral devices requiring
REMARKS
other than standard 200 ms pulse time and delay time.
n1 indicates the energizing time and n2 indicates the delay time,
using 10ms units.
Control peripheral device #1
FUNCTION
CODE <BEL>
07
HEX
Executes drive pulse for peripheral device #1.
REMARKS
Control peripheral device #1 immediately
FUNCTION
<FS>
CODE
1C
HEX
Executes drive pulse for peripheral device #1 immediately.
REMARKS
Control peripheral device #2 immediately
FUNCTION
<EM>
CODE
19
HEX
Drives peripheral device #2. The drive pulse width and delay time
REMARKS
are fixed at 200 ms.
Control peripheral device #2 immediately
FUNCTION
<SUB>
CODE
1A
HEX
Drives peripheral device #2. The drive pulse width and delay time
REMARKS
are fixed at 200 ms.
n2
07 n1 n2
– 90 –