Star Micronics TSP400 Series Programmer's Manual page 56

(3) CODE 93
1) Each mode and module width
a) Horizontal printing
Item
Module width
Width of one
character (mm)
Note: The start and stop bars are not included.
b) Vertical printing
Item
Module width
Width of one
character (mm)
2) REQUIREMENTS
a) The start and stop patterns are automatically inserted.
b) The check characters are automatically inserted.
c) 2-character set codes are same as CODE 128. (Expect FNC1-4, and START
A-C)
EXAMPLE Bar code number 00, starting position of bar code (X, Y) = 40
mm, 16 mm Mode 2 of CODE 93, Bar code rotation: 0 degree.
Bar code height 10 mm, Data "ABCDefg"
LPRINT CHR$(&H1B);"PB00;0400,0160,2,3,0,0100";
CHR$(&H0A);CHR$ (&H00);
LPRINT CHR$(&H1B);"RB00;ABCDefg";
CHR$(&H0A);CHR$ (&H00);
Mode 1 Mode 2 Mode 3
2 dots 3 dots 4 dots
2.25 3.375 4.5
Mode 1 Mode 2 Mode 3
2 dots 3 dots 4 dots
2.625 3.75 4.875
– 53 –