Star Micronics TSP400 Series Programmer's Manual page 55

(2) Interleaved 2 of 5 (ITF)
This code can represent numeric characters from 0 to 9. This code can be used for
an application that requires higher character density.
JIS and EAN specify that this code be used for printing on corrugated boxes.
1) Width of narrow elements and length of two characters
a) Horizontal printing
Item Mode 1 Mode 2 Mode 3 Mode 4 Mode 5 Mode 6 Mode 7 Mode 8 Mode 9
Width of narrow
elements
Width of wide
element
Ratio
Length of one
character (mm)
b) Vertical printing
Item Mode 1 Mode 2 Mode 3 Mode 4 Mode 5 Mode 6 Mode 7 Mode 8 Mode 9
Length of two
character (mm)
2) REQUIREMENTS
a) When this code is used, the start and stop patterns are automatically
inserted.
b) When the number of digits for bar code data is an odd number, the printer
automatically adds "0" in the highest digit position.
c) Details conform to the AIM, USS-12/5, ANSI, and JIS X 0502 specifica-
tions
EXAMPLE Bar code string number 25, starting position of bar code (X, Y)
= 5 mm, 10 mm, use Mode 1 of ITF, Bar code height 10 mm
Data: 0123456, bar code rotation direction 0 degree
LPRINT CHR$(&H1B);"PB25;0050,0100,1,2,0,0100";
CHR$(&H0A); CHR$(&H00);
LPRINT CHR$(&H1B);"RB25;0123456"; CHR$(&H0A);
CHR$(&H00);
2 dots 4 dots 6 dots 2 dots 4 dots 6 dots 2 dots 3 dots 4 dots
5 dots 10 dots 15 dots 4 dots 8 dots 12 dots 6 dots 9 dots 12 dots
1 : 2.5 1 : 2.5 1 : 2.5
4 8 12
4.625 8.625 12.625 4.125
1 : 2 1 : 2 1 : 2
3.5 7 10.5
7.625 11.125 5.125
– 52 –
1 : 3 1 : 3 1 : 3
4.5 6.75 9
7.375 9.625