Star Micronics TSP400 Series Programmer's Manual page 94

Commands to Control Auto Cutter
Full-cut command to the auto cutter
FUNCTION
CODE <ESC> "d"
1B
HEX
CODE <ESC> "d"
1B
HEX
Cuts the paper fully when start position detect is invalid.
REMARKS
Feeds the paper to the top of the next page, then cuts it fully when
start position detect is valid.
When auto cutter is in valid, this command is not valid.
"0" or <ESC> "d"
64 30 or
"1" or <ESC> "d"
64 31 or
– 91 –
<0>
1B 64 00
<1>
1B 64 01