Star Micronics TSP400 Series Programmer's Manual page 80

Commands to Move the Print Position
Line feed
FUNCTION
CODE <LF>
0A
HEX
Prints the current line and feeds the paper to the next line.
REMARKS
Carriage return
FUNCTION
<CR>
CODE
0D
HEX
Prints the current line and feeds the paper to the next line.
REMARKS
This command is ignored when CR code is invalid.
Feed paper n lines
FUNCTION
<ESC> "a"
CODE
1B
HEX
Prints the current line and feeds the paper n lines (where n is
REMARKS
between 1 and 127).
Form feed
FUNCTION
<FF>
CODE
0C
HEX
Feeds the paper to the top of the next page, according to the page
REMARKS
length set by <ESC>"C"n or <ESC>"C"<0>n when memory switch
1-8 is set to 0, and according to the sensor output when the memory
switch is set to 1. The print position is at the left margin in both cases.
Horizontal tab
FUNCTION
<HT>
CODE
09
HEX
Moves the print position to the next horizontal tab stop. Ignored if
REMARKS
there is no next horizontal tab stop on the current line.
n
61 n
– 77 –