Star Micronics TSP400 Series Programmer's Manual page 83

Set horizontal tab stops
FUNCTION
CODE
<ESC> "D"
1B
HEX
Cancels all current horizontal tab stops and sets new tab stops at
REMARKS
columns n1, n2, etc. at the current character pitch, where n1, n2,
etc. are numbers between 1 and 255. A maximum of 16 horizontal
tab stops can be set.
The tab stops must be specified in ascending order; any violation
of ascending order terminates the tab stop list. Standard termina-
tion is by the <0> control code.
n1 n2
44 n1 n2
– 80 –
... <0>
... 00