Star Micronics TSP400 Series Programmer's Manual page 99

EXAMPLE 3
LPRINT CHR$(&H1B);"#2,0001";CHR$(&H0A); CHR$(&H00);
LPRINT CHR$(&H1B);"?";CHR$(&H0A); CHR$(&H00);
Cutter:
Printing speed:
Note: In order to enable the changed memory switch setting, turn the printer OFF
and ON again or send the printer reset command (<ESC>"?") to the printer.
Initialize printer
FUNCTION
CODE <ESC> "@"
1B
HEX
Reinitializes the printer. Clears the print buffer and returns settings
REMARKS
to their power-up values.
Does not clear the input buffer, downloaded characters, or condi-
tions for peripheral devices.
Enquiry
FUNCTION
CODE
<ENQ>
05
HEX
Causes the printer to transmit a status byte (except in STX-ETX
REMARKS
mode).
When this command is received after text data in STX-ETX mode,
the printer transmits the status and check bytes.
Invalid
25 mm/sec
40
– 96 –