Star Micronics TSP400 Series Programmer's Manual page 81

Vertical tab
FUNCTION
CODE
<VT>
0B
HEX
When start position detect is invalid, feeds the paper to the next
REMARKS
vertical tab stop and moves the print position to the left margin.
Performs a line feed if no vertical tabs are set or if the current line
is at or below the last vertical tab stop.
Same as <LF> when start position detect is valid.
Set line spacing to 4 mm
FUNCTION
CODE <ESC> "z"
1B
HEX
Sets the distance the paper advances in subsequent line feeds to
REMARKS
4 mm.
Set line spacing to 3 mm
FUNCTION
CODE <ESC> "0"
1B
HEX
Sets the distance the paper advances in subsequent line feeds to
REMARKS
3 mm.
One time n/4 mm feed
FUNCTION
CODE <ESC> "J"
1B
HEX
Performs a line feed of n/4mm once only.
REMARKS
The value of n is 1 to 255.
Space setting for lines is not changed.
"1" or <ESC> "z"
7A 31 or
30
n
4A n
– 78 –
<1>
1B 7A 01