Battery Switch Off Notification - TOHATSU BFT 150D Owner's Manual

NMEA2000-compatible display:
• Follow instructions for the display.
• If the display allows selection of
notification to be preset, select
"Notify" (or equivalent).
• Turn on the power supply to the
display before turning on the
ignition switch of the outboard
motor.
• The indication may differ,
depending on the type of display.
When "Periodic Maintenance" is
indicated:
1. Have the periodic maintenance
performed without delay after
returning to port.
2. Reset the hour counter.
If not reset, the maintenance
indication will remain in the
display, and the hour count until the
next maintenance will be in error.
When the periodic maintenance is
conducted before "Periodic
Maintenance" is indicated, reset the
hour counter.
If not reset, the hour count until the
next maintenance will be in error.
CONTROLS AND FEATURES

Battery Switch OFF Notification

This function alerts the operator that
the battery switch is OFF and must be
turned to the ON position. If the
battery switch is OFF, a buzzer will
sound three times during the
following situations.
• When starting the engine
• When using the power trim/tilt
switch
• When turning the battery switch
OFF while the ignition switch is
ON
31