TOHATSU BFT 150D Owner's Manual page 68

OPERATION
CAUTION
• Improper trim angle results in
unstable steering condition.
• Do not trim excessively while
cruising through rough waves,
or it may cause an accident.
• Excessive trim angle can result
in cavitation and racing of the
propeller, and trimming up the
outboard motor excessively
can cause damage to the water
pump.
• Decrease the trim angle on high
speed turns to reduce the possibility
of propeller ventilation.
• Improper outboard motor trim
angle can result in an unstable
steering condition.
66
OUTBOARD MOTOR
TRIMMED TOO LOW
OUTBOARD MOTOR TRIMMED CORRECTLY
When cruising:
(A) Into a high wind, trim the outboard motor down slightly to lower the bow
and improve boat stability.
(B) With a tail wind, trim the outboard motor up slightly to raise the bow and
improve boat stability.
(C) Through rough waves, do not trim the outboard motor too low or too high
to avoid an unstable steering condition.
OUTBOARD MOTOR
TRIMMED TOO HIGH