Table of Contents
Advertisement
NEUTRAL
REMOTE
CONTROL
LEVER
(R2 type)
2. Set the remote control lever in the
NEUTRAL position.
The engine does not start unless the
remote control lever is set in the
NEUTRAL position.
NEUTRAL
NEUTRAL
REMOTE
CONTROL
LEVER
(R3 type)
STARTING THE ENGINE
IGNITION
SWITCH KEY
NEUTRAL
3. Turn the ignition switch key to the
START position until the engine
starts.
When the engine starts, release the
key, allowing it to return to the ON
position.
• The starter motor consumes a
large amount of current. Do not
therefore run it continuously for
more than 5 seconds at a time. If
the engine does not start within 5
seconds, wait at least 10 seconds
before running the starter motor
again.
• Do not turn the ignition switch
key to the START position while
the engine is running.
START
ON
ON
START
55
Advertisement
Table of Contents
