TOHATSU BFT 150D Owner's Manual page 65

(R1 type)
NEUTRAL
REVERSE
FORWARD
REMOTE
CONTROL
LEVER
FORWARD
2. Move the remote control lever from
NEUTRAL toward FORWARD
position.
R1 type:
Moving about 32° engages the
gear. Moving the remote control
lever further opens the throttle and
increases the engine speed.
(R2 type)
NEUTRAL
FORWARD
REVERSE
FORWARD
REMOTE
CONTROL
LEVER
FORWARD
R2, R3 types:
Moving about 35° engages the gear.
Moving the remote control lever
further opens the throttle and
increases the engine speed.
For the sake of fuel economy, open
the throttle about 80%.
(R3 type)
NEUTRAL
REVERSE
FORWARD
OPERATION
• When cruising at full throttle, note
that the engine speed must be in the
range BFT150D: between 5,000
-1
min (rpm) and 6,000 min
• If you feel that the engine speed
jumped up when the hull jumped or
at ventilation, cruise the boat by
returning the throttle to the slow
speed side.
• See "Propeller Selection" (page 40)
for a relation between the propeller
and the engine speed.
CAUTION
Do not operate without the
engine cover. Exposed moving
parts could cause injury; water
may damage the engine.
For best performance, passengers and
equipment should be distributed
evenly to balance the boat.
-1
(rpm).
63