TOHATSU BFT 150D Owner's Manual page 4

Control and Feature Identification Codes
Model
Type
Transom Height
(Shaft Length)
Standard Rotating Propeller Shaft
Counter-rotating Propeller Shaft
Power Trim/Tilt
Note that the types of the outboard motor differ according to the countries where they
are sold.
BFT150D is provided with the following types according to the shaft length and the rotating
direction of the propeller shaft.
TYPE CODE
Example
X C R U
2
508 mm (20.0 in)
635 mm (25.0 in)
Destination
U: Europe, Z: Australia
Remote Control
R: Mechanical wire
Rotating direction of propeller shaft
C: Counter-rotating propeller shaft is equipped.
None: Standard rotating propeller shaft is equipped.
Transom Height
L: 508 mm (20.0 in), X: 635 mm (25.0 in)
BFT150D
LRU XRU XRZ

 
  
  
How To Determine Which
Direction The Propeller Shaft
Rotates
XCRU
The direction the propeller shaft
rotates can be determined based on

whether or not the shaft has a groove.
With groove: Counter-rotating

Without groove: Standard rotating

WITHOUT
GROOVE
WITH
GROOVE
GROOVE