TOHATSU BFT 150D Owner's Manual page 93

Table of Contents

Advertisement

<Standard Spark Plug>
Check-clean/Replace interval:
Every 100 operating hours or 6
months.
Recommended spark plug:
ZFR6K-11 (NGK)
KJ20DR-M11 (DENSO)
Use only the recommended spark
plugs or equivalent. Spark plugs
which have an improper heat range
may cause engine damage.
<Inspection and Replacement>
1. Disconnect the battery negative (–)
terminal.
2. Unlock and remove the engine
cover (see page 41).
MAINTENANCE
SPARK PLUG COVER
3. Remove the two bolts with the
6 mm hex wrench, and remove the
spark plug cover.
4. Use a hex. wrench to remove the
bolt holding the ignition coil. Move
the ignition coil to a position that
allows to remove the wire
connector easily.
BOLTS
91

Advertisement

Table of Contents
loading

Table of Contents