Table of Contents
Advertisement
MAINTENANCE
IGNITION COIL
WIRE CONNECTOR
5. Disconnect the wire connector
from the ignition coil by pushing
on the lock tab and pulling on the
connector. Pull on the plastic
connector, not the wires.
6. Remove the ignition coil by pulling
it up slightly. Take care not to give
an impact or drop the ignition coil.
Replace the ignition coil if dropped
it.
92
BOLT
SPARK PLUG
WRENCH
7. Use the spark plug wrench and 19
mm eye wrench to remove the
spark plugs.
New plug
8. Inspect the spark plugs.
(1) If the electrodes are heavily
corroded or carbon-soiled,
19 mm EYE
clean with a wire brush.
WRENCH
(2) Replace a spark plug if the
central electrode is worn.
The spark plug can wear out in
different ways.
If the sealing washer shows
signs of wear, or if the
insulators are cracked or
chipped, replace the spark
plugs.
Plug needing
replacement
Advertisement
Table of Contents
