TOHATSU BFT 150D Owner's Manual page 96

Table of Contents

Advertisement

MAINTENANCE
<Optional Parts: Iridium Spark
Plug>
Check-clean interval:
Every 200 operating hours or every
year.
Replacement interval:
Every 400 operating hours or 2 years.
Recommended spark plug:
IZFR6K11 (NGK)
SKJ20DR-M11 (DENSO)
Use only the recommended spark
plugs or equivalent. Spark plugs
which have an improper heat range
may cause engine damage.
Installation and removal procedure of
the Iridium spark plugs are the same
as the standard spark plugs.
94
These spark plugs have an iridium
coated center electrode. Be sure to
observe the following when servicing
iridium spark plugs.
• Do not clean the spark plugs. If an
electrode is contaminated with
accumulated objects or dirt, replace
the spark plug with a new one.
The cleaning of the iridium spark
plugs consult with your serving
dealer, unless the owner has the
proper tools and is mechanically
proficient.
• Use only a ''wire-type feeler
gauge'' to check the spark plug gap
if necessary. To prevent damaging
the iridium coating of the center
electrode, never use a ''leaf-type
feeler gauge.''
The gaps should be 1.0 – 1.3 mm
(0.039 – 0.051 in).
• Do not adjust the spark plug gap.
If the gap is out of specification,
replace the spark plug with a new
one.

Advertisement

Table of Contents
loading

Table of Contents