Cruising - TOHATSU BFT 150D Owner's Manual

OPERATION

Cruising

(R1 type)
(R2 type)
POWER TRIM/TILT POWER TRIM/TILT
SWITCH SWITCH
1. Press on the DN (down) of the
power trim/tilt switch on the
remote control lever and trim the
outboard motor at the lowermost
position.
62
LOWERMOST
POSITION
R3 type:
When the two outboard motors are
mounted:
1) Press on the DN (down) of the
power trim/tilt switch on the
remote control lever and trim the
outboard motors at the lowermost
position.
(R3 type)
(single type)
(dual type)
POWER TRIM/TILT POWER TRIM/TILT
SWITCH SWITCH
(LEFT) (RIGHT)
2) With the outboard motors trimmed
at the lowermost position, adjust
the trim angle of the right and left
outboard motors using the switch
on the remote control lever
simultaneously.