Spectra Logic Spectra S50 User Manual page 68

T-series and 50-series
Table of Contents

Advertisement

Table 15-2: Library SCSI Error Codes
Sense Key
ASC
92h
4h
92h
Hardware
Errors
92h
(continued)
92h
92h
92h
92h
92h
92h
92h
92h
92h
92h
92h
92h
92h
92h
92h
92h
Chapter 15. Error Reporting
ASCQ
Error Description
06h
DMA error.
Command phase overrun—device
07h
demanded more CDB bytes than
available.
08h
Device supplied excess status bytes.
Device did not complete command
09h
with Command Complete.
Device skipped MSG OUT phase after
0Ah
Selection.
Device rejected extended ID
0Bh
message.
Device rejected Initiator Detected
0Ch
Error message.
0Dh
Device rejected Abort message.
0Eh
Device rejected Reject message.
0Fh
Device rejected NOOP message.
10h
Device rejected Parity Error message.
Device rejected Bus Device Reset
11h
message.
12h
Device rejected Identify message.
13h
Device went to Bus Free illegally.
14h
Device skipped a phase illegally.
Device did not return GOOD status to
15h
automatic Request Sense.
Queued command requested
16h
without disconnect privilege.
Queued command requested to a
17h
target routine.
Queued command requested with
18h
queuing disabled.
Explanation or Error Remedy
Reset the F-QIP and retry the operation. You
may also have to reboot the server. If the
problem persists, contact Technical Support.
This error code is reserved and represents an
internal error that should not occur. Contact
Technical Support if you see this error.
68

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Spectra S50 and is the answer not in the manual?

This manual is also suitable for:

T120T50T950

Table of Contents