Table 4-9: Serial Number Page Field Values - Spectra Logic Spectra S50 User Manual

Table 4-9: Serial Number Page Field Values

Field Name
Peripheral Qualifier
Peripheral Device Type
Page Code
Page Length
Code Set
Identifier Type
Identifier Length
Serial Number
Vendor Identification
Product Identification
c
World Wide Name
a. The serial number can vary between two and seven digits in length. All T-Series and 50-Series libraries currently report 04.
b. The vendor identification, product identification, product revision level, and patch level data fields all return ASCII-format data. Unused bytes are
filled with space characters (20h).
c. Fibre Channel interface libraries and drives only.
Chapter 4. Inquiry—12h
Value
Returned Meaning
The library is a single LUN device. This value is returned only if the LUN
000b
sent in the INQUIRY command is 0h.
Identifies the library as a media changer device. This value is returned
08h
only if the LUN sent in the INQUIRY command is 0h.
This value is returned if the LUN sent in the INQUIRY command is not 0h.
1Fh
It indicates that the LUN is an unknown type.
83h Device Identification Page.
32h Libraries exported through QIPs return 50 (32h) bytes.
26h Libraries exported through direct-attached drives return 38 (26h) bytes.
02h The Identifier field contains ASCII graphic codes.
01h The Identifier field is associated with the post that received the request.
22h T-Series and 50-Series libraries return 34 (22h) bytes.
a
Variable ASCII representation of library serial number.
These bytes are the ASCII representation of SPECTRA (uppercase)
b
SPECTRA
followed by a space (20h).
This is the product identification returned by all T-Series and 50-Series
PYTHON
libraries.
Variable Actual WWN of QIP (not ASCII represented).
23