Spectra Logic Spectra S50 User Manual page 33

Chapter 6. Mode Sense—1Ah
In Table 6-6: Device Capabilities Fields Format–1Fh on page 32, the following
abbreviations and definitions apply:
DT: Data transfer element (tape drive)
IE: Import/export element (TAP)
ST: Storage element (magazine slot)
MT: Medium transport element (tape picker)
Stor: A value of 1 in a StorXX bit indicates media can be stored at elements of type XX.
A value of 0 indicates that it cannot.
->: A value of 1 in a XX -> YY bit indicates that media can be moved from elements of
type XX to elements of type YY.
<>: A 1 in a XX<>YY bit indicates that media can be exchanged between elements of
types XX and YY. All of these values are 0 because the library does not support media
exchanges.
For example, the 1 in the StorDT bit indicates that media can be stored at data transfer
element addresses (tape drives). The 0 in the MT->MT bit indicates that media cannot
be moved from one medium transport element to another medium transport element;
this is because there is only one medium transport element.
33