Keystone - BOXLIGHT AYW502 Owner's Manual

Keystone

This function is used to correct the distortion
image.
Keystone
Sets whether or not to keep the keystone
correction after turn off the projector or plug out
the power cord.
Store .... The keystone correction will be kept
after unplug the power cord or turn off
the projector.
Reset ... The keystone correction will be
canceled after unplug the power cord
or turn off the projector.
H/V Keystone
Adjust when the horizontal or vertical trapezoid of the projected image is distorted.
Reduce the upper
width with  button.
 Note:
● The white arrows indicate that there is no correction.
● A red arrow indicates the direction of correction.
● An arrow disappears at the maximum correction.
4-Corner correction
Adjust when the four corners of the projected image are distorted.
Press▲▼◄►to adjust the item.
Upper left
6-Corner correction (for WUXGA modle only)
Adjust when the six corners of the projected image are distorted.
Press▲▼◄►to adjust the item.
Upper left Upper right
OSD setting-Expand
Reduce the lower
width with  button.
4-Corner correction
Upper right
6-Corner correction
Upper middle
Keystone menu
Expend
Keystone
Keystone
H/V Keystone
4-Corner correction
6-Corner correction
Curved correction
Grid image tune
Reset value
Reduce the left
width with  button.
Lower left
Lower middle Lower left
Store
Reduce the right
width with  button.
Lower right
Lower right
43