Memory Viewer - BOXLIGHT AYW502 Owner's Manual

Memory Viewer

The Memory Viewer function allow to project the pictures which are stored in the USB memory
Device. This function only available when the USB memory device inserted into the projector.
1 Press MENU button on the remote control to display screen menu.
2 Press  button to select "Memory Viewer", then press the OK button.
3 Press  button to select the item you want to set, press the OK button.
4 Press  button to adjust the item, then press the OK button.
Set Slide
Start the slide show.
Slide transition effect
Set the slide transition effect while the images
switching as slide show.
Slide down ......... Switch the image from the top
to the bottom.
Slide right ........... Switch the image from the left
to the right.
Pressto select "Apply" and press the OK
button to execute the setting.
Sort Order
Set the sort order of the slide show.
Extend Order .... Sort files or folders in
extended order.
Size Order ........ Sort files or folders in
amount of data order.
Time Order ....... Sort files or folders in stored
time order.
Name Order ...... Sort files or folders in name order.
Pressto select "Apply" and press the OK button to execute the setting.
Rotate
Set the rotate direction of image.
No Rotate ........ Rotate is disabled.
270 Degrees .... Rotate 270 degrees in anti-clockwise direction.
180 Degrees .... Rotate 180 degrees.
90 Degrees ...... Rotate 90 degrees in anti- clockwise direction.
Pressto select "Apply" and press the OK button to execute the setting.
Best Fit
Set the image whether or not to fit with the projected screen.
On ...... Display the image to fit with the aspect of the projected screen.
Off ...... Display in the normal pixels of the image.
Pressto select "Apply" and press the OK button to execute the setting.
Repeat
Enable or disable repeat function of the slide show.
On ......Display all of the files repeatedly.
Off ...... Return to the thumbnail page after the last file is broadcasted.
Pressto select "Apply" and press the OK button to execute the setting.
Apply
Execute the setting in slide show mode.
Press  to select "Apply", then press the OK button, to launch the setting effect of slid show.
OSD setting-Memory Viewer
Memory Viewer menu
Memory
Viewer
Set slide
Slide transition effect
Sort order
Rotate
Best fit
Repeat
Apply
 Note:
● The "Memory Viewer" menu is available when
select the input source as "Memory Viewer".
Slide right
Name order
No rotate
Off
Off
49