Connect The Ac Power Cord - BOXLIGHT AYW502 Owner's Manual

Connect the AC power cord

Standard voltage employed by your projector is AC 100-240V. It adapts to different input voltage
automatically. Your projector employs 2-phase power cord with neutral ground cable.
Do not use any other type of power cords or you may face the risks of electric shock. In case you
have any doubt on type of power cord you are using, please call authorized dealer or service cen-
ter for help. Before powering on your projector, get all external equipment connected in advance.
!
Note:
Keep your AC power socket close to your
projector for easy plugging and unplugging.
Note:
For safety reasons, unplug the AC pow-
er cord when your projector is not in
use. Your projector will consume a small
amount of power when it is connected to
AC grid power and in standby mode.
Precautions on power cord
Your AC power cord should meet regulations of the country/district where your projector is
used.
Please make sure the type of the power plug is compliant with those given in figure below.
Make sure you are using a valid AC power cord.
In case the included AC power cord does not comply with the AC power socket in your loca-
tion, call your dealer for replacement.
The projector side
Connect to power cord connector of
your projector
Note:
● Use of invalid power cord may hamper product performance or even lead to electric
shock, fire, and other incidents. Please use power cord compliant with the included one
to ensure product performance and operation safety.
● The frequently used cables are: AC power cord, VGA cable, audio cable, video cable,
and RS232 control cable.
22
Installation
Connect included AC power
cord to your projector.
Connect to the AC power socket
Connect to AC power socket
Grounding end