Info; Information - BOXLIGHT AYW502 Owner's Manual

Information

The information menu is used to the detect signal of projected image and running state.
Menu operation
Press MENU button on the remote control
or control panel to display the screen menu.
Press  to select Info., the information menu
will appear as the right picture.
The status of projector will display in
information menu.
Input
The selected input source is displayed.
H-sync freq .
The horizontal frequency of the input signal is
displayed in KHz or - - - -KHz when no signal is
detected.
V-sync freq .
The vertical frequency of the input signal is
displayed in Hz or - - - - Hz when no signal is
detected.
Light source counter
The usage time of the lamp is displayed.
Power management
The setting status of "Power management" is
displayed.
Image mode
The setting status of "Image mode" is
displayed.
Firmware version
The information of firmware version.
50
OSD setting-Info.
info. menu

Info.

Input
H-sync freq.
V-sync freq.
Light source counter
Power management
Image mode
Firmware version
HDMI 1
- - -
- - - kHz
- - - Hz
2 H
Ready
5 Min
Standard