Power Management; Filter Counter; Test Pattern - BOXLIGHT AYW502 Owner's Manual

Power management

For reducing power consumption as well as
maintaining the lamp life, the Power management
function turns off the projection lamp when the
projector is not operated for a certain period. Select
one of the following options:
Ready - When the lamp has been fully cooled down,
the POWER indicator changes to green
blinking. In this condition, the projection
lamp will be turned on if the input signal is
reconnected or any button on the remote
control or control panel is pressed.
Power off - When the lamp has been fully cooled
down, the power will be turned off.
Off - Disable the Power management function.
Timer - If the input signal is interrupted and no button
is pressed for more than 30 seconds, the timer
display with No signal appears. It starts the
countdown until the lamp is turned off. Press
 button to set the Timer(1~30min.)
Ready countdown - Set the time that ready status
transfers to standby status
automatically.(0-30min. 0 Min: not
transfer automatically)
In ready status, press POWER
button to switch to standby status,
and press any other button to turn
on the projector.

Filter counter

This function is used to set a frequency for filter cleaning.
When the projector reached a specified time between cleanings, a Filter warning icon appears on
the screen, notifying the cleaning is necessary. After cleaning the filter, be sure to select RESET
and set the timer. The Filter warning icon will not turn off until the filter counter is reset.
Filter counter................ Display the using time of the filter.
Timer............................ Setting the timer for warning icon.
Filter counter reset ...... Reset the value of counter after clean up the filter.

Test Pattern

This function is used to set the internal test signal:
Gray scale 1, Gray scale 2, Gray scale 3, Gray
scale 4, Color bar, Red, Green, Blue, Cross hatch,
White, Black and Raster gray.
OSD setting-Expand
Power management
Expend
Language
Auto setup
Keystone
Logo
Security
Power management
Filter counter
Test pattern
Network
Factory default
01
Time left before Lamp is off.
Note:
Factory default: "Timer: 5 min",
"Ready countdown: 5 min".
Test Pattern
Expend
Language
Auto setup
Keystone
Logo
Security
Power management
Filter counter
Test pattern
Network
Factory default
No signal
: 20
47