Table of Contents
Advertisement
Name and function of your projector
Remote controller operation range
Point your remote controller to the IR receiver
of your projector
Maximum operation range of your remote con-
troller is an angle within 30° perpendicular.
The Maximum operation distance in front of the
IR receiver is 7 meters.
The projector will not respond if there any
object between the remote control and the
receiver, or if strong light falls on the sensor.
Weak batteries will also prevent the remote
control from properly operating the projector.
Install battery of remote controller
① Open the battery
cover.
Please follow the following rules for safety operation:
● Use two of AAA or LR3 alkaline batteries.
!
● Always replace batteries in sets
● Do not mix new and old batteries as one pair.
● Keep your remote controller away from water or other liquids.
● Do not expose your remote controller to environments with high humidity or
temperature.
● Do not drop your remote controller.
● In case of any battery solution leaking in the compartment, clear it thoroughly
before placing new batteries in it.
● Using battery of other types than what specified on this manual may lead to
risks of explosion.
● Please dispose your old battery by following instructions given in tag of the
battery or local regulations.
② Inserting the new batteries.
30°
30°
20m
30°
30°
20m
Two AAA batteries
with correct polarity
(+ and –), be sure
battery terminals are
in contact with pins in
the compartment.
③ Put the cover back.
30°
30°
20m
30°
30°
20m
19
Advertisement
Table of Contents
