Adjustment pad
●
You may use the adjustment leg to raise your projector up to 18 mm / +3.5°.
●
Turn the pad to tilt your projector to required height.
●
To raise your projector, turn both pads clockwise.
●
To lower down your projector or close the pad, turn both pads counterclockwise.
●
You can launch the auto setup function to adjust the keystone distortion automatically or do it
with the remote controller or OSD menu manually.
Focus and Zoom Adjustment
Rotate the ZOOM lever to adjust the projection image size.
Rotate the FOCUS ring to adjust the focus of the image.
28
Basic operation
Zoom lever
18mm
3.5°
18mm
3.5°
18mm
3.5°
18mm
3.5°
18mm
3.5°
18mm
Focus ring
3.5°