Manual Computer Adjustment - BOXLIGHT AYW502 Owner's Manual

Manual PC signal format adjustment
The scan system of your projector may fail to detect signal format used by certain computers as
they opted some special signal format. The manual computer adjustment function of your projector
enables you to adjust individual parameter to align with most special signal format.
1 Press MENU button on the remote controller or control panel and the OSD displays. Press
button to select Display icon, press
2 Press button to select items for adjustment, press
selection or press
Auto PC adj.
Adjust [Fine sync], [H Position], [V Position] and
[H Size] automatically.
Fine Sync
Eliminate flashes in image. Press
adjust Total Dots. (From 0 to 31)
H Position
Press button to adjust horizontal position of
image.
V Position
Press button to adjust vertical position of
image.
H size
Adjust and minimize the effect of interference
caused by projection of patterns consisting of
vertical stripes.
The projection of the vertical striped pattern may
cause cyclic patterns (noise). Adjust to minimize
the amount of interference.(From -15 to +15).
Note: H.Size must be set before adjust Fine sync.
Aspect
Press button to choose the selection to set
the screen size to fit the image while maintaining
the aspect ratio of the input signal.
Normal ...... Projects the image at the maximum size
while maintaining the aspect ratio of the
input signal.
16:9.......... Projects the image at 16:9 aspect ratio.
16:10 ........ To provide an image to fit the screen.
(*Only for VGA and HDMI input signal)
Note:
● The adjustment of Fine sync, H Position, V Position and H.Size is only for computer signal input.
● The Fine Sync, Total Dots and Clamp function will be disabled if 480i, 576i, 480p, 576p, 720p,
1080i or 1080p has been selected in the system menu.
OSD Setting-Display
button or OK button to confirm your selection.
button to adjust settings.
button to
button or OK button to confirm your
Auto PC adj. Menu
Display
Auto PC adj.
Fine sync
H Position
V Position
H. Size
Aspect
Project way
Menu position
Background display
System
Note:
- The projector executes the Auto PC adjustment
automatically when the computer signals input the
projector for the first time.
- Auto PC adjustment may not work depending on the
model of the computer and the input signal.
- The Auto PC adjustment cannot be operated when 480i,
576i, 480p, 576p, 720p 1080i or 1080p is selected in the
"Display" menu → "System", or when the signal is coming
from the HDMI terminal.
Aspect menu
Display
Auto PC adj.
Fine sync
H Position
V Position
H. Size
Aspect
Project way
Menu position
Background display
System
17
0
0
0
Normal
Front
Center
Blue
1024 x 768, 60Hz
17
0
0
0
Normal
Front
Center
Blue
1024 x 768, 60Hz
35