Safety Operation Guideline - BOXLIGHT AYW502 Owner's Manual

Safety instructions
This document and your projector employ certain symbols to illustrate how to use your projector
safely. They are described below: Please get yourself familiar with them before going through this
document.
!
Caution
!
Note
Danger of electric shock
DO NOT open this.
Note: DO NOT remove the casing (or back cov-
er) as it may result in electric shock. Users shall
not execute any maintenance work on com-
ponents within your projector except replacing
lamps. Call qualified maintenance personnel in
case of any maintenance requirements.
Please read this manual carefully before installing and operating your projector.
Your projector comes with a lot of convenient features and functions. You may make the most
of these features and keep your projector in good working conditions by using it correctly.
Invalid operation of your projector may not only shorten its life cycle but also may lead to
product failure, fire, or other incidents.
In case of any operation abnormality, refer to this manual to check your operation and
connections and try solutions given in the "Troubleshooting" section at end of this manual. If
the problem persists, call your dealer or our service center.
4

Safety operation guideline

Ignoring messages indicated by this symbol may lead to personal injuries
or deaths due to human errors.
Ignoring messages indicated by this symbol may lead to personal injuries
or property damage.
High voltage inside with risks of electric shock.
Hot surface with risks of person injury.
Do not look intor the lens while the light source is ON. The strong light
from the light source may cause damage to your eyesight.
Do not stare into the beam which may be harmful to the eyes.
Do not place anything in front of the lens while the projector is operating.
Things placed in front of the lens may overheat and burn or start a fire. If
you want to temporarily stop the projected image, use the Blank key on
the remote control.
Caution
!
High voltage inside with risks of
electric shock.
Operation and maintenance tips
!
about these components.