Table of Contents
Advertisement
Air ventilation
Openings in the casing are designed for ventilation and overheating prevention. DO NOT block or
cover these openings to keep your projector in normal operation and from overheating.
Air intake
Place your projector correctly
Use your projector at specified location in correct way. Invalid projector location may shorten light
source 's life-cycle or even lead to severe incidents or fire.
360° projection
Our projector support 360° projection.
Vertical 360°
Safety operation guideline
Air exhaust
!
Note:
Heat exhaust at the air outlet Keep the
following in mind when using or installing
your projector:
• DO NOT place flammable materials or
sprayers near your projector.
• Keep the air outlet one meter away
from other objects.
• DO NOT touch the area close to the
air outlet especially the metal compo-
nents, e.g. screws. This area and parts
will get very hot once your projector
starts operating.
• DO NOT place any object atop your
projector. They may not only be dam-
aged but also lead to fire after being
overheated.
Cooling fans are designed for cooling
your projector. Fan speed is auto ad-
justed subject to internal temperature of
your projector.
Horizontal 360°
Vertical & Horizontal 360°
11
Advertisement
Table of Contents
