Input Selection; Input Select - BOXLIGHT AYW502 Owner's Manual

Input select

Direct Operation
Press VGA, HDMI on the remote control as input
source.
Menu operation
1 Press INPUT button on the remote control or
control panel to display the input select menu.
2 Press  button to select VGA, HDMI 1,
HDMI 2, Memory Viewer, Network or USB
Display, then press the OK button.
When input source is from computer
VGA
connected to VGA terminal with VGA
cable, please select "VGA".
When input source is from equip-
HDMI 1
ment connected to HDMI terminal
with HDMI cable, please select
"HDMI 1".
When input source is from equip-
HDMI 2
ment connected to HDMI terminal
with HDMI cable, please select
"HDMI 2".
When input source is from device
Memory Viewer
connected to USB-A terminal, please
select "Memory Viewer".
When input source is from network
Network
connected to LAN terminal with LAN
cable, please select "Network".
When input source is from the
USB Display
device connected to USB terminal,
please select "USB Display".
Note:
- When the "Input search" function is set to "On" in
the "Auto setup" function, the input signal will be
searched automatically.
- When input signal is from "USB Display", "Memory
Viewer" and "Network", the FREEZE, ASPECT,
IMAGE, AUTO SETUP, TEST PATTERN and
SCREEN function cannot work.

Input selection

Remote control
Control Panel
Input select menu
INPUT
INPUT
VGA VIDEO
VGA
AUTO MENU
KEYSTONE IMAGE
INPUT
SCREEN LAMP
+ +
D.ZOOM VOLUME
- -
VGA
HDMI 1
HDMI 2
Memory Viewer
Network
USB Display
HDMI
HDMI
FREEZE PATTERN
MUTE INFO.
POWER STATUS LIGHT
BLANK
TIMER
33