Led Indicator Status - BOXLIGHT AYW502 Owner's Manual

LED indicator status

Check LED indicator to learn status of your projector.
Light indicator
POWER STATUS
Green / Red / Green / Red /
Orange / Blue Orange
(1.5 sec. on
7.5 sec. off)
(1.5 sec. on
1.5 sec. off)
(0.5 sec. on
0.5 sec. off)
(0.5 sec. on
0.5 sec. off)
(0.5 sec. on
0.5 sec. off)
(0.5 sec. on
0.5 sec. off)
(0.5 sec. on
0.5 sec. off)
70
Appendix
LIGHT
Green / Red /
Orange
Power Off (without AC power supply).
Network Standby status. Press the Power button to turn it on.
ECO Standby status. Press the Power button to turn it on.
Normal Standby status. Press the Power button to turn it on.
Laser Light On. (Laser Power setting as ECO1 / ECO2)
(2.5 sec. on
0.5 sec. off)
Laser Light On. (Laser Power setting as Normal)
Booting up.
Cooling down.
Fail to launch the function while you press the control panel with the
"Key Lock" setting as "Projector".
Laser Light Source is lighting up again after the failuature of lighting
up.
(0.5 sec. on
0.5 sec. off)
The Light Source has reach the life time. Please replace the Laser
Light Source
(0.5 sec. on
0.5 sec. off)
Laser Light Source over time warning. Please replace the Laser Light
Source
(0.5 sec. on
0.5 sec. off)
Abnormal temperature detected and power off automatically.
The current value of Laser Light Source is too low
Status of your projector