Table of Contents
Advertisement
Operating
Adjusting the image position
When the place to put the projector is slightly uneven to the left or right, use the
feet to place the projector horizontally. Using the feet can also tilt the projector in
order to project at a suitable angle to the screen.
This projector has 2 feet and 2 knobs.
A foot is adjustable while pulling up the knob on the same side as it.
1.
Holding the projector, pull the knobs up to loose the feet.
2.
Position the front side of the projector to the desired height.
3.
Release the knobs in order to lock the feet.
4.
After making sure that the feet are locked, put the projector gently.
CAUTION ►Do not handle the knobs without holding the projector,since the
projector may drop down.
Adjusting the zoom and focus
1.
Use the focus ring to focus the picture.
2.
Use the zoom ring to adjust the screen size.
Holding the projector,press the adjustable knobs to extend the both feet.
RING DOOR
ZOOM RING
FOCUS RING
17
Advertisement
Table of Contents
