Color Adjust; Color Adjust (Computer Signals) - BOXLIGHT AYW502 Owner's Manual

Color Adjust (with PC input source)
Menu operation
1 Press the MENU button on remote controller and the OSD displays. Press
Color Adjust icon, press
2 Press button to point to required item and press OK button to confirm your selection.
Image mode
Switch image mode to fit the image source and
the projector. (default setting is Standard)
Dynamic
The light output is maximized for use in bright
room.
Standard
Normal picture level preset on the projector.
Cinema
Enriched grayscale for viewing movies.
Bla ckboard (Green)
An image mode designed for displaying on a
blackboard (Green). It boosts quality of image projected on blackboard (Green). This is designed for a
board in green rather than black as indicated by its name.
DICOM
A highly clear X-ray image is reproduced. Digital radiographs with excellent detail and clarity for medi-
cal training, presentations and conferences.
Colorboard
Image mode suitable for image projecting on surface of wall in red, blue, yellow or green.
User Image
Default image mode set by users in the Image Adjust menu.
Contrast
Press button to decrease contrast, press
Brightness
Press button to decrease brightness, press
Color Temp.
Press button to select required color temperature
High: Blueish image color
Mid.: Natural image color
Low: Reddish image color
Red
Press button to lighten red tint and
Green
Press button to lighten green tint and
Blue
Press button to lighten blue tint and
Sharpness
Press button to soften image and
38
OSD setting-Color Adjust
button or OK button to confirm your selection.
button to increase contrast.
button to darken it.
button to darken it.
button to darken it.
button to sharpen it.

Color adjust

Image mode
Contrast
Brightness
Color temp.
Red
Green
Blue
Sharpness
button to increase brightness
button select
Standard
32
32
Mid
32
32
32
8