1. Manuals
  2. Brands
  3. BOXLIGHT Manuals
  4. Projector
  5. Cinema 12SF
  6. User manual

BOXLIGHT Cinema 12SF User Manual

Boxlight user's guide multimedia projector 12sf
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
5466User.qxd 11/1/01 11:36 AM Page 1
Cinema 12SF
USER'S
USER'S
GUIDE
GUIDE

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Cinema 12SF and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for BOXLIGHT Cinema 12SF

Summary of Contents for BOXLIGHT Cinema 12SF

  • Page 1 5466User.qxd 11/1/01 11:36 AM Page 1 Cinema 12SF USER’S USER’S GUIDE GUIDE...
  • Page 2 5466User.qxd 11/1/01 11:36 AM Page 2 Cinema 12SF User’s Guide...
  • Page 3 Copyright © 2001 by B OXLIGHT Poulsbo, Washington. All rights reserved.
  • Page 4 FCC Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential instal- lation.
  • Page 5 Declaration of Conformity Manufacturer:B OXLIGHT 19332 Powder Hill Place, Poulsbo, Washington, USA We declare under our sole responsibility that the Studio Experience Cinema 12SF projector conforms to the following directives and norms: EMC Directive 89/336/EEC, Amended by 93/68/EEC EMC: EN 55022...

  • Page 7: Table Of Contents

    TABLE OF CONTENTS Safety Instructions Introduction Image Resolution Compatibility Unpacking the Projector Usage Guidelines If You Need Assistance Warranty Setting up the Projector Connecting the Enhanced Connectivity Module Connecting a Video Device Displaying a TV signal Displaying a DVD or VHS tape Projecting HDTV Projecting a video game Connecting a camcorder...
  • Page 8 Maintenance & Troubleshooting Cleaning the Lens Replacing the Projection Lamp Cleaning the Projection Lamp Filter Screens Replacing the Batteries in the Remote Control Troubleshooting Appendix Specifications Accessories Audio/video inputs on the Enhanced Connectivity Module Projected Image Size Index...

  • Page 9: Safety Instructions

    SAFETY INSTRUCTIONS Please read and follow all safety instructions provided BEFORE using your new projector. Failure to comply with safety instruc- tions may result in fire, electrical shock, or personal injury and may damage or impair protection provided by equipment. Please save all safety instructions.
  • Page 10 Warning: Refer all service to qualified service personnel. Ser- • vicing your own projector will void the warranty. See below for the technical support contact information. Caution: Don’t block ventilation openings. Use of an unautho- • rized ceiling mount may lead to ventilation blockage and/or personal injury.

  • Page 11: Introduction

    848x480 for 16:9 format and 800x600 for 4:3 format (see page 9 for more information on video formats). For computer sources, the SVGA resolution of the Cinema 12SF’s projected image is 800x600. The projector is compatible with screen resolutions up to 1024x768. If your computer’s screen reso- lution is higher than 1024x768, reset it to a lower resolution before you connect the projector.
  • Page 12 If you are experienced in setting up presentation systems, use the Quick Start card that was included in the shipping box. For com- plete details on connecting and operating the projector, refer to this User’s Guide. IGURE Shipping box contents Projector + lens cap Soft carry case User’s Guide and quick start...
  • Page 13 focus ring keypad connector panel Back view of projector with Enhanced Connectivity Module attached zoom ring power cord connector height adjustment button IGURE Front view of projector IGURE Back view of projector IGURE...

  • Page 14: Usage Guidelines

    Usage Guidelines Do not look directly into the projection lens when the lamp is • turned on. The bright light may harm your eyes. Do not block the grills on the projector. Restricting the air flow • can cause it to overheat and turn off. If this happens, you must wait a minute before attempting to turn it back on.

  • Page 15: Setting Up The Projector

    SETTING UP THE PROJECTOR There are a number a factors to consider when determining where to set up the projector, including the size and shape of your screen, the location of your power outlets, and the distance between the projector and the rest of your equipment. Here are some general guidelines.
  • Page 16 WARNING: Do not place the projector on a tablecloth or other soft covering that may block the vents. Do not use a non-Studio Experience ceiling mount. In the unlikely event of the bulb rupturing, thoroughly clean the area in front of the projector and discard any edible items placed in that area The image exits the projector at a given angle.

  • Page 17: Connecting The Enhanced Connectivity Module

    Connecting the Enhanced Connectivity Module The connector panel on the back of the projector looks like this: S-video composite computer The projector ships with an enhanced connectivity module. When you attach it to the back of the projector, it looks like this: computer 1 computer 1-M1 audio in...
  • Page 18 NOTE: If you have turned Auto Source off (page 45), you may need to press the source button more than once to display an active source. The sources switch in this order: PC 1-Analog, PC 1-Digital, Video 3-Component HDTV, Video 3-Component, Video 1 S-Video, Video 2-Composite, PC 2-Component, and PC 2-Analog.

  • Page 19: Connecting A Video Device

    Connecting a Video Device You can connect VCRs, DVD players, camcorders, digital cam- eras, video games, HDTV receivers, and TV tuners to the projec- tor. There is an audio input. You can connect the audio directly to the projector to get sound from the 3-watt onboard speaker, or you can connect it to your stereo’s receiver to get sound from your own speakers.
  • Page 20 Input Signal Standard Broadcast TV (not HDTV), via cable, digital cable, satellite TV, DirectTV HDTV Video Camera Video Game Basically, any device that can change channels is considered a tuner. The next step is to figure out what type of connectors/output the equipment you want to connect has.

  • Page 21: Displaying A Tv Signal

    Displaying a TV signal Determine the cables you’ll need (refer to the table on page 10 if necessary). This depends on what type of output is coming from the tuner (remember, you cannot directly connect the coaxial cable that enters your house from a cable or satellite company, the signal must pass through a tuner first.) Also, determine if you want the sound to come out of the projector or out of your own audio system.
  • Page 22 IGURE Connecting the projector to a TV tuner using the S-video cable and the A/V cable 5 Plug the power cord into the side of the projector, then plug it into your electrical outlet. A surge-protected power strip is recommended. The LED on the top of the projector (Figure 24 on page 30) •...
  • Page 23 8 Turn on your TV tuner. The TV image should display on the projection screen. If it • doesn’t, press the source button on the remote to display your TV image (press the button until “S-video” appears in the corner). You can select a default source to determine which source the pro- jector examines first during power-up for active video;...
  • Page 24 If your TV tuner has composite video output: 1 Plug the A/V cable’s round yellow connector into the com- posite “video-out” connector on your tuner (Figure 14). This connector may be labeled “To Monitor.” 2 Plug the other yellow connector into the yellow composite connector (labeled video 2) on the projector.

  • Page 25: Displaying A Dvd Or Vhs Tape

    Displaying a DVD or VHS tape Determine the cables you’ll need. This depends on what type of output is coming from the video device. Also, determine if you want the sound to come out of the projector or out of your own audio system.
  • Page 26 IGURE Connecting the projector to a video player using the S-video cable and the A/V cable 5 Plug the power cord into the side of the projector, then plug it into your electrical outlet. A surge-protected power strip is recommended. The LED on the top of the projector (Figure 24 on page 30) •...
  • Page 27 8 Plug in and turn on your video device. The video image should display on the projection screen. If • it doesn’t, press the source button on the remote to display your video image. video You can select a default source to determine which source the projector examines first during power-up for active video;...
  • Page 28 If your video device has composite video output: 1 Plug the A/V cable’s round yellow connector into the com- posite “video-out” connector on your video device (Figure 17). This connector may be labeled “To Monitor.” 2 Plug the other yellow connector into the yellow composite connector (labeled video 2) on the projector.

  • Page 29: Projecting Hdtv

    Projecting HDTV Determine the cables you’ll need (refer to the table on page 10 if necessary). This depends on what type of output is coming from the tuner (remember, you cannot directly connect the coaxial cable that enters your house from a cable or satellite company, the signal must pass through a tuner first.) Also, determine if you want the sound to come out of the projector or out of your own audio system.
  • Page 30 5 Plug the power cord into the side of the projector, then plug it into your electrical outlet. A surge-protected power strip is recommended. The LED on the top of the projector (Figure 24 on page 30) • lights green. Now you are ready to turn on the equipment and watch HDTV.

  • Page 31: Projecting A Video Game

    If your HDTV tuner has a DVI or component output: For DVI, connect an optional DVI cable into the connector labeled “PC 1”. For component, connect an optional component video cable into the connector labeled “video 3”. Follow the instruc- tions in the previous section to connect and display these sources.
  • Page 32 NOTE: Lamp life will be extended if you turn the power off, then wait 1 minute while the lamp cools before unplugging the projector. The Lamp LED will light green when the lamp has cooled. Turning Off the Projector If you want to turn off the projector for a short period of time, press the button on the keypad or remote.

  • Page 33: Connecting A Computer

    Connecting a Computer The projector ships with an analog VESA computer cable. If your computer has a digital output, you can order the optional digital M1 computer cable. Using a digital source generates the highest quality and brightest image possible. 1 Plug one end of the computer cable into the PC 2 connector on the projector.

  • Page 34: Displaying Your Computer Source

    NOTE: Always use the power cord that shipped with the projector. Displaying your Computer Source 1 Remove the lens cap. 2 Plug the power cord into the side of the projector, then plug it into your electrical outlet. A surge-protected power strip is recommended.
  • Page 35 Uncheck any checked boxes, then click Next. Windows automati- cally locates the driver. If this driver has been removed, reload the driver using your Windows operating system CD. When Windows finds the driver, you are ready to install it. Click Next.

  • Page 36: Turning Off The Projector

    NOTE: With some computers, the order in which you power up the equipment is very important. Most computers should be turned on last, after all other peripherals have been turned on. Refer to your computer’s documentation to determine the correct order. NOTE: Lamp life will be extended if you turn the power off, then wait 1 minute while the lamp cools...

  • Page 37: Using The Projector

    USING THE PROJECTOR This section describes how to use and make adjustments to the projector. It also provides a reference to the keypad and remote buttons and the options available from the on-screen menus. Basic Image Adjustment 1 If the image doesn’t display completely, zoom the image (page 27), adjust the height of the projector (page 28), choose a different screen aspect (page 35) or choose a different resize option (page 42).
  • Page 38 The projector is equipped with a self-locking, quick-release eleva- tor foot and button. To raise the projector: 1 Press and hold the elevator button (Figure 21). 2 Raise the projector to the height you want, then release the button to lock the elevator foot into position. IGURE Adjusting the height of the projector 3 If necessary, turn the leveling knob to adjust the angle of the...

  • Page 39: Using The Remote Control

    Using the Remote Control Install the 2 AAA batteries in the remote. See page 53 if you need help. Point the remote control at the projection screen or at the front or back of the projector. The range for optimum operation is about 25 feet.

  • Page 40: Using The Keypad And Remote Buttons

    NOTE: If you have turned Auto Source off (page 45), you may need to press the source button more than once to display an active source. The sources switch in this order: PC 1-Analog, PC 1-Digital, Video 3-Component HDTV, Video 3-Component, Video 1 S-Video, Video 2-Composite, PC 2-Component, and PC 2-Analog.
  • Page 41 Keystone + - Use this feature to adjust the image vertically and make a squarer image. 1 Press the button to reduce the upper part of the keystone + image, and press the keystone - part. You can also adjust keystone from the Display menu (see page 34 for details on the menu).
  • Page 42 Zoom mode This activates the zoom feature. When you press this button, the zoom icon appears in the lower right corner of the screen. Press button to zoom in on part of the image, press the zoom + button to zoom out. When the image is zoomed, you can zoom - use the up/down/left/right arrow buttons to display a different part of the zoomed image (pan the image).

  • Page 43: Using The On-Screen Menus

    Using the On-Screen Menus The projector has menus that allow you to make image adjust- ments and change a variety of settings. Most of these adjustments aren’t available directly from the keypad. To open the on-screen menus, press the keypad or remote. (The menus automatically close after 30 seconds if no buttons are pressed.) This displays the Main menu and changes the volume, source, and standby buttons on the keypad to menu navigation and adjustment buttons (the arrow...

  • Page 44: Display Menu

    Display Menu To access the Display menu settings, press the to display the Main menu, press the down arrow to highlight Display, then press menu/select IGURE Display menu Keystone This option helps to keep the image square as the angle of projec- tion is changed.
  • Page 45 1 Use the up and down arrows to highlight Contrast, press , use the arrows to adjust the contrast, then press menu/select to accept your changes. menu/select Tint The tint adjusts the red-green color balance in the projected image. 1 Use the up and down arrows to highlight Tint, press , use the arrows to adjust the tint, then press menu/select to accept your changes.

  • Page 46: Audio Menu

    Audio Menu IGURE Display menu Volume You can also adjust the volume directly from the projector’s key- pad. 1 Use the up and down arrows to highlight Volume, press , use the arrows to adjust the volume, then press menu/select to accept your changes.

  • Page 47: Image Menu For Video Sources

    Image Menu for Video Sources To access the Image menu settings, press the to display the Main menu, press the down arrow to highlight Image, then press menu/select Resize allows you to select from among four different re-sizing Resize options. The goal is to show the most detail on the screen while preserving the ratio of width to height.
  • Page 48 Table 1: Resize options for various setups and this If you have screen this source aspect choose this resize to get this image option...
  • Page 49 16x9 image input 16:9 input on 4:3 screen with Resize set to Enhanced Widescreen Widescreen Letterbox Letterbox image input 16:9 input on 16:9 screen with Resize set to Widescreen Letterbox Enhanced Widescreen 16x9 image on 4:3 screen 16:9 image fills 16:9 screen NOTE: A source that says “Anamorphic”...
  • Page 50 Standard 4:3 image input IGURE 4:3 input on 16:9 screen with Resize set to Standard Native Resize menu/select 4:3 image on 16:9 screen menu/select...
  • Page 51 Overscan Zoom Zoom menu/select keystone - zoom mode Video Standard Video standard menu/select keystone + menu/select menu/select NOTE: If you already know the video standard used in your geo- graphical area, it’s often best to manually select it.

  • Page 52: Image Menu For Computer Sources

    Image Menu for Computer Sources menu/select IGURE Image menu for computer sources Resize Resize Enhanced Widescreen Letterbox Native Resize menu/select Zoom Zoom menu/select keystone + keystone - zoom mode menu/select Widescreen Standard menu/select menu/select...
  • Page 53 Auto Image Auto image Auto image Manual Sync Auto image menu/select Manual Tracking menu/select Horizontal/Vertical Position menu/select menu/select menu/select, Auto Image menu/select, menu/select, NOTE: The Manual Sync, Manual Tracking, Horizontal Position and Vertical Position options are available only for ana- log computer sources.

  • Page 54: Color Management Menu

    NOTE: Your viewing preferences may vary. Cycle through the degamma options and pick the one you like the best. Color Management Menu IGURE Color Management menu Degamma Degamma menu/select Color Space Standard Color Space Standard Auto Color Gain Red, Green, Blue menu/select menu/select menu/select...

  • Page 55: Control Menu

    Control Menu menu/select Auto Source source Auto source Default Source Default source Standby Time menu/select Control menu data menu/select menu/select menu/select IGURE video...

  • Page 56: Advanced Menu

    Advanced Menu IGURE Advanced menu Rear Project Rear Project Rear Project Ceiling Project Ceiling Project menu/select Display Messages Display Startup Screen menu/select...

  • Page 57: Language Menu

    Reset Language Menu menu/select menu/select menu/select menu/select Language menu menu/select IGURE...

  • Page 58: Status Menu

    Status Menu menu/select IGURE Status menu Lamp Hours Used Video Standard Computer Resolution (computer sources only) Source Software Version...

  • Page 59: Maintenance & Troubleshooting

    MAINTENANCE & TROUBLESHOOTING Cleaning the Lens Replacing the Projection Lamp WARNING: To avoid burns, allow the projector to cool for at least 30 minutes before you open the lamp module door. Never extract the lamp module while the projector is operating.
  • Page 60 WARNING: Be extremely careful when removing the lamp module. In the unlikely event that the bulb ruptures, small glass fragments may be generated. The lamp module is designed to contain these fragments, but use caution when removing the lamp module. CAUTION: Never operate the projector with the lamp door open or removed.
  • Page 61 volume - IGURE Removing the lamp module power source volume - WARNING: Do not drop the lamp module or touch the glass bulb! The glass may shatter and cause injury.

  • Page 62: Cleaning The Projection Lamp Filter Screens

    & Cleaning the Projection Lamp Filter Screens IGURE Lamp module screens screen screen...

  • Page 63: Replacing The Batteries In The Remote Control

    Replacing the Batteries in the Remote Control...

  • Page 64: Troubleshooting

    & Troubleshooting Table 2: LED behavior and meaning LED color/behavior Meaning...
  • Page 65 Table 3: Problem with the projector Symptom Remedy The projector is not run- ning (LED is not lit green) The projector is not run- ning (LED is lit green) Projector is running (LED lit green), but nothing appears on projection screen Projector is running (LED blinking series of 3 fast...
  • Page 66 No sound Lamp seems to be getting dimmer Lamp shuts off & Table 3: Problem with the projector...
  • Page 67 Table 4: Problem with a video image Symptom Remedy Image is out of focus Image isn’t centered on the screen Image is too wide or narrow for screen Image is not square Image is noisy Color or text not being pro- jected Image and menus are reversed left to right...
  • Page 68 Image from component source appears “greenish” Image appears “torn” Table 5: Problem with a computer image Symptom Only the start-up screen displays Image isn’t centered on the screen & Table 4: Problem with a video image Remedy...
  • Page 69 Table 5: Problem with a computer image The screen resolution is not right Image is “noisy” or streaked Projected colors don’t match the computer or video player’s color Image appears “purplish” 1-800-762-5757 360-779-7901 Auto Image Auto Image...
  • Page 70 &...

  • Page 71: Specifications

    APPENDIX Specifications Temperature Operating 50 to 104 50 to 95 Non-operating -4 to 158 Altitude Operating 0 to 10,000 feet (3,048 meters) Non-operating 0 to 20,000 feet (6,096 meters) Humidity Operating and non-oper. 10% to 95% relative humidity, non-condensing Dimensions 10.4 x 11.1 x 3.3 inches (264 x 283 x 85 mm) with module 10.4 x 12.1 x 3.3 inches (264 x 307 x 85 mm) Weight...

  • Page 72: Accessories

    NOTE: Use only Studio Experience-approved accessories. Other products have not been tested with the projector. Accessories Standard Accessories (ship with the projector) Quick Start card User’s Guide Soft Case Shipping Box VESA Computer Cable 6 ft (1.8 m) Audio/Video Cable 6 ft (1.8 m) S-Video Cable 13 ft (4 m) Remote Projection Lamp Module (included in projector)

  • Page 73: Audio/Video Inputs On The Enhanced Connectivity Module

    Optional Accessories Hard Shell Shipping Case Audio/Video Cable Projector Ceiling Mount Kit Deluxe Insta-Theatre Screen-80” diagonal, 4:3 ratio Deluxe Insta-Theatre Screen-60” diagonal, 4:3 ratio Wall or Ceiling Mountable Projection Screens Projection Lamp Module High-definition S-video Cable High-definition Component Cable GyroMouse Presenter RF Remote OXLIGHT Wireless keyboards and remotes Audio/video inputs on the Enhanced Connectivity Module...

  • Page 74: Projected Image Size

    NOTE: Use the graph and table to help you determine projected image sizes. Projected Image Size maximum image size Distance to Screen (feet) IGURE Projected image size for 16:9 aspect ratio 5DQJH RI GLVWDQ.H WR WKH V.UHHQ IRU D JLYHQ V.UHHQ VL]H IRU  DVSH.W Diagonal Screen Size Image Width...
  • Page 75 maximum image size 5DQJH RI GLVWDQ.H WR WKH V.UHHQ IRU D JLYHQ V.UHHQ VL]H IRU  DVSH.W UDWLR Diagonal Screen Size Image Width (inches/m) (inches/m) 60/1.5 48/1.22 72/1.8 58/1.47 84/2.1 67/1.70 90/2.3 72/1.83 100/2.5 80/2.03 120/3.1 96/2.44 minimum image size Distance to Screen (feet) Projected image size for 4:3 aspect ratio 7DEOH ...

  • Page 77: Index

    INDEX Numerics...

  • Page 81: Warranty Limitation And Exclusion

    Limited Warranty Alternatives: 3 Year Parts and Labor Product Warranty 1 Year Parts Only Accessory Warranty 120 Day Replacement Lamp Warranty WARRANTY LIMITATION AND EXCLUSION DISCLAIMER OF UNSTATED WARRANTIES Limited Warranty...

  • Page 82: Limitation Of Liability

    Limited Warranty Period To Be Eligible For Limited Warranty Coverage To Obtain Warranty Service LIMITATION OF LIABILITY Limitation on Bringing Action Governing Law Mandatory Arbitration...
  • Page 83 5466User.qxd 11/1/01 11:36 AM Page 9 Cinema 12SF Boxlight 19332 Powder Hill Place Poulsbo, WA 98370-7407 USA www.boxlight.com U.S.A. and Canada 800-762-5757 International 360-779-7901 Printed on recycled paper.

Table of Contents

Save PDF