Mitel 6869 SIP User Manual page 45

You must save this function to a configurable key using Self Service Portal
(see chapter "Configuring or deleting a key assignment", page 99).
Notes: • Your call number can only be hidden if you select an external call num-
ber.
• This feature depends on the range of services offered by your provider.
Activating/deactivating calling line identification restriction permanently:
Press the function key for
➔
Function is activated/deactivated, LED on the function key is switched on/off.
You phone number is hidden in all outgoing calls.
Activating CLIR per call:
1. Press the function key for
2. Enter the call number and press the
➔
Putting a call partner on hold
You want to briefly interrupt the active call.
You can put the call party on hold and then take them back again on the
same phone.
Putting the active call party on hold:
Press the Hold key.
➔
The call party is put on hold, is displayed and the LED of the line key flashes.
Take back the call party on hold:
Press the Hold key, the flashing line key, or the
➔
The call is active again.
Parking conversation partner
You would like to keep the person you are talking to on hold without block-
ing a phone line.
You may park
again on the same phone on which you parked the person.
Mitel 6867 SIP / Mitel 6869 SIP
eud-1664/2.0 – R6.0 – 06.2018
Call number is dialed and your number is not displayed to the called party.
1)
the person you are talking to and then pick up the call
Hide number.
Hide number.
Select softkey.
Pick up softkey.
Phoning
45