Interchangeable key caps
You can change the position of certain function keys or switch them with
other functions. You can swap existing key caps or fit keys with the addi-
tional key caps supplied in accordance with table below. The keys must
have been configured either by your system administrator or by yourself in
the Self Service Portal (see chapter "MiVoice Office 400 Self Service Por-
tal", page 9).
Function key
Call lists key
Do not disturb key
Conference key
Line key L1
Line key L2
Line key L3
Line key L4
Phone book key
Forwarding button
Voice mail key
Redial key
Deflect key
1)
The key can only be set for functions that do not require an LED signal.
2)
Key can only be configured as a number or function key.
Note:
If your phone is activated as free seating phone, the configuration of keys
with interchangeable key caps is locked.
Configuring or deleting a key assignment
You want to configure a configurable key with a call number, function or
busy lamp field, or you want to delete the key configuration.
Mitel 6867 SIP / Mitel 6869 SIP
eud-1664/2.0 – R6.0 – 06.2018
Key cap
interchangeable
yes
1)
yes (Mitel 6867 SIP
only)
yes
yes
1)
yes (Mitel 6867 SIP
only)
yes
1)
yes (Mitel 6867 SIP
only)
Personalizing your phone
2)
2)
2)
Additional key cap
(included in the scope of
delivery)
yes
yes
yes
yes
yes
99