Table of Contents
Advertisement
Phoning
You can activate/deactivate many of your phone's functions by remote
control from a different phone.
The remote control is initiated using a special function code. You must
then enter the function commands and function codes (see chapter "Over-
view of available functions", page 62).
Using remote control from a third-party phone:
1. Enter function code #06.
2. Enter your phone number.
3. Enter your PIN.
4. Enter the function code for activating/deactivating the function you want.
Pick up the handset.
➔
You hear the acknowledgement tone.
Put the handset on-hook.
➔
The function is activated/deactivated.
Note:
The default PIN setting '0000' is not accepted (for more information on the PIN,
see chapter "Changing the PIN", page 90).
82
Mitel 6867 SIP / Mitel 6869 SIP
eud-1664/2.0 – R6.0 – 06.2018
Advertisement
Table of Contents
