Table of Contents
Advertisement
Attention: When you handle electrostatic discharge (ESD) sensitive devices, take
precautions to avoid damage from static electricity. For details on handling these
devices, refer to "Handling electrostatic discharge-sensitive devices" on page 152.
1.
Review the safety precautions that are listed in Chapter , "Related service
information," on page 149.
2.
Turn off the server/workstation and peripheral devices and disconnect all
external cables and power cords.
3.
Remove the server/workstation from the rack; then, remove the cover as shown.
For more information see "Removing the cover" on page 49.
4.
Remove the expansion slot clip that holds the expansion slot cover in place by
sliding it upward and off the frame of the server/workstation.
Note: The illustrations in this document might differ slightly from your
hardware.
Retention
latch
Cover release
Screws
lever
Adapter
card
Tab
Expansion
slot
Expansion
slot clip
Expansion
slot cover
Installing options
51
Advertisement
Table of Contents
